WOODWORKING & CUTTING TOOLS

Stanley Sliding Pocket Utility Knife Quickslide 010810

Stanley Snap Off Blades (10) 9mm 011300

Template Profile 12.7mm Diameter Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work. This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm (C) Cutting Length: 9.5mm Shank: 1/4in

Template Profile 12.7mm Diameter Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work. This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm (C) Cutting Length: 25.4mm Shank: 1/4in

Two Flute Cutter 10mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in D - Diameter - 10mm C - Cutting Length - 19.1mm T.C.T.

Two Flute Cutter 12.7mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in D - Diameter - 1/2in 12.7mm C - Cutting Length - 1 1/4 31.8mm T.C.T. 2 Flutes.

Two Flute Cutter 12.7mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. D1 1/2 inch D1 12.7 mm Cut length 2 inches Cut length 50 mm Shank Diameter 1/2 inch

Two Flute Cutter 12.7mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. When deep cuts are required, more than one pass should be taken. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. D1 1/2 inch D1 12.7 mm Cut length 2 inches Cut length 50 mm Shank Diameter 1/2 inch

Two Flute Cutter 12.7mm Diameter Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling 1/2in Shank. TCT extra long cutter. Designed for hollow honeycomb board worktops. * Use only on professional routers with 80 mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base. C = 50 mm D = 12.7 mm 1/2 in D = 12.7 mm. C = 50 mm.

Two Flute Cutter 12mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in C = 12mm D = 19mm

Two Flute Cutter 15mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in The Trend CO24AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. Diameter: 15 mm. Cutting depth: 25 mm. Shank diameter: 1/4 in.

Two Flute Cutter 20.0mm Diameter 20mm Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in D - Diameter - 3/4in 19.1mm C - Cutting Length - 1.0in 25.4mm T.C.T. 2 Flutes

Two Flute Cutter 6.3mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in D - Diameter - 3/8in 9.5mm C - Cutting Length - 3/4in 19.1mm T.C.T. 2 Flutes.

Two Flute Cutter 6mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in D - Diameter - 15/64in 6.0mm C - Cutting Length - 5/8in 16mm T.C.T. 2 Flutes.

Two Flute Cutter 8mm Diameter

Addax TCT Hinge Cutter 35mm Quantity: 1 For cutting blind holes into MDF and chipboard to accept cantilever door hinges. • Tungsten Carbide cutting edges for long life • Bright and black finish • 12.7mm shank compatible with both pillar drills (13mm capacity) and ½” industrial routers (R.P.M)