HAND TOOLS

220 Block Plane 112220

4pc Filling Blade Set 11748 / DT050P

The Stanley STA 0-16-251 FatMax® Thru Tang Chisel is 6mm (1/4 inch) in width and 125mm in length The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retention

T50P Heavy-Duty Tacker Gun The Arrow T50™ professional heavy-duty tacker gun has an all steel construction with hardened steel working parts and jam resistant mechanism and a durable chrome finish. It has an easy squeeze double leverage operation and a visual staple refill window and over 50 years of tested durability. The choice of home owners and pros alike. Uses Arrow T50™ staples: 6, 8, 10, 12, 13 and 14mm (ceiltile) staples. Ideal for use in: Insulation, Roofing, Screening, Upholstery & Light wiring.

Arrow HT55 Prof Hammer Tacker HT55 Professional Hammer Tacker Professional hammer tacker with heavy-duty steel construction and anti-slip rubber grip handle. Removable handle pin releases magazine. Holds two full strips of Arrow T50® staples: 6, 8 and 10mm. Ideal for : Roofing Underlayment. Housewrap. Insulation. Vapour Barrier. Carpet Padding Installation.

Arrow T50 Staples 10mm box 1250 The Arrow ARRT5038S T50 Staples Box contains top quality 0.050 wire staples for use with T50 and T55 tackers: .3These stapes can be used for roofing felt, housewrap, insulation, weather-stripping, wire mesh, carpeting, etc. with the following specifications: Size: 3/8 inch / 10mm Qty: 1250 staples

Arrow T50 Staples 12mm box 1250 The Arrow ARRT5012S T50 Staples Box contains top quality 0.050 wire staples for use with T50 and T55 tackers: These stapes can be used for canvas, roofing paper, vapor barrier etc. with the following specifications: Size: 1/2 inch / 12mm Qty: 1250 staples

Arrow T50 Staples 14mm box 1250 The Arrow ARRT50916S T50 Staples Box contains top quality 0.050 wire staples for use with T50 and T55 tackers: These staples can be used for heavy insulation, metal lath, cornerite, roofing, etc. with the following specifications: Size: 9/16 inch / 14mm Qty: 1250 staples

Arrow T50 Staples 6mm box 1250 The Arrow ARRT5014S T50 Staples Box contains top quality 0.050 wire staples for use with T50 and T55 tackers: These stapes can be used for window screens & shades, shelf papers and closet linings with the following specifications: Size: 1/4 inch / 6mm Qty: 1250 staples

Arrow T50 Staples 8mm box 1250 The Arrow ARRT50516S T50 Staples Box contains top quality 0.050 wire staples for use with T50 and T55 tackers: These stapes can be used for roofing felt, housewrap, upholstery, valances, headboard coverings, shelving, etc. with the following specifications: Size: 5/16 inch / 8mm Qty: 1250 staples

Toolbox Handsaw 350mm (14in) 15tpi Bahco PrizeCut Toolbox Handsaw is a hardpoint fleam toothed saw.The fine teeth give a smooth cut in a wide variety of wood based materials, aluminium, plastics and laminates. Fitted with a plastic handle which is strong and comfortable in use. Blade Length: 350mm (14in). Teeth: 15 tpi.

REC15212TC C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mm

TREC15214TC C152 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mm Shank = 1/4in

Boa Grabit Screw & Bolt Remover 2pc Set BOAGBSET The BOA Grabit quickly and easily removes broken, damaged, or embedded screws and bolts from wood, metal and plastic. It will work on the most popular screw head types. Simply burnish, flip the tool and extract. Compatible with all standard variable speed drills. Made from high quality tool steel, precision engineered for multiple extractions and maximum performance.

Carpenters Pencil Blue(BLAB)

Carpenters Pencil Red (BLAR)