WOODWORKING & CUTTING TOOLS

Jack 880 Handsaw 20"

Intumescent Cutter Set 15mm x 24mm Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work. Trend C220 x 1/4 TCT Intumescent Cutter to suit 4mm thick strip of 15mm width. Specification: Diameter: 24mm Cutting Depth: 15mm Bearing: 16mm Shank: 1/4in

Intumescent Cutter Set 10mm x 24mm Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work. Trend C209 x 1/4 TCT Intumescent Recessor to suit 4mm thick strip of 10mm width. Specification: Diameter: 24mm Cutting Depth: 10mm Bearing: 16mm Shank: 1/4in

Addax Holesaw Arbor - Hex Shank 14-30mm Quantity: 1 Holesaw arbors including pilot drill for holesaw 14-30mm.

Holesaw Arbor 32-210mm Hex Shank AA2

Addax TCT Hinge Cutter 35mm Quantity: 1 For cutting blind holes into MDF and chipboard to accept cantilever door hinges. • Tungsten Carbide cutting edges for long life • Bright and black finish • 12.7mm shank compatible with both pillar drills (13mm capacity) and ½” industrial routers (R.P.M)

Guided Trimmer 6.35mm Diameter x 25.4mm The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.

FAISTHDUTY Heavy-Duty Triggershot 3-in-1 Tacker/Nailer f

Dovetail Cutter Angle = 104 degrees 12.7mm Diameter Trend dovetail cutters are designed for use with commercial dovetailing and stair housing jigs. Also cutters to produce sliding and lapped dovetails, through dovetails and end on dovetails. Suitable for use on natural timbers and man-made boards, they are used extensively in cabinet work, furniture making, stair trenching, dovetail jointing and carcass construction. T.C.T. 1/4in Shank. A = 104° C = 12.7mm D = 13.2 mm

Diagonal Cutting Pliers 160mm The Roughneck Diagonal Cutting Pliers for cutting wires. They are made from high-quality steel, that has been drop-forged, hardened and tempered. In addition, the cutting edge is induction hardened for added durability. They have finely polished heads with a clear lacquer coating that helps prevent rust. Fully encased spring-loaded. The pliers are fitted with comfortable double injected, air-cushion grips that help to reduce fatigue during use. The handles also feature a handy lanyard hole. Length: 160mm

Coping Saw Blade Set pk10 faicsbs These Faithfull Coping Saw Blades are manufactured from high quality steel for strength and durability. The teeth configuration on coping saw blades is specifically designed to ensure smooth and fast cutting especially when making turns to follow contours, and cutting shapes. For use with Faithfull (FAICS) Coping Saw. The Faithfull FAICSBS coping saw blades have the following specifications: Application: Wood cutting. Length of blade: 165mm (6 1/2 inch). 14 tpi.

REC15212TC C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mm

TREC15214TC C152 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mm Shank = 1/4in

Toolbox Handsaw 350mm (14in) 15tpi Bahco PrizeCut Toolbox Handsaw is a hardpoint fleam toothed saw.The fine teeth give a smooth cut in a wide variety of wood based materials, aluminium, plastics and laminates. Fitted with a plastic handle which is strong and comfortable in use. Blade Length: 350mm (14in). Teeth: 15 tpi.

The Stanley STA 0-16-251 FatMax® Thru Tang Chisel is 6mm (1/4 inch) in width and 125mm in length The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retention

4pc Filling Blade Set 11748 / DT050P