SAFETY & SECURITY

DIGITAL IMMERSION HEATER TIMER 2A 500W MAX LOAD 42 ON/OFF PROGRAMS Timer Switches

Accessible Disabled Persons Toilet Alarm Kit The UK's market-leading Disabled Persons Toilet Alarm kit. Includes everything required for a BS8300 clause compliant emergency assistance alarm. Attractively designed, easy to install and simple to use. Allows a distressed person to raise an alarm in the event of an emergency. To operate, the user pulls the cord of a ceiling pull to activate a light and sounder outside the WC and on the system's Call Controller. New ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal inside the WC to confirm help is on the way. Includes an NC943B 12V 140mA Call Controller c/w standby battery and relay, NC807C Ceiling Pull, NC806CS Overdoor Light c/w Sounder, NC809DBBT Accessible Toilet Reset Point c/w Sounder and NC949 Accessible WC Sticker. Can be wired in 4 core stranded security cable. Can also be used as a single zone emergency assistance alarm in changing rooms, solariums, interview rooms, reception areas and more.

The Ei105C is an Optical Smoke Alarm, powered by a 9V Zinc battery. The alarm gives a fire warning when adequate smoke enters the alarm. Interconnectable with up to 12 battery powered alarms.

The Ei128R is a mains powered Relay Module that triggers external devices, such as a strobe light or telecare device, if the alarms in the property activate.

The Ei146RC is an Optical Smoke Alarm with 230V AC mains power supply and 9V alkaline battery back-up. It is ideal for location in the hallways and living rooms.

The Ei428 is a mains powered relay module that triggers external devices, such as a strobe light or telecare device, if the alarms in the property activate.

EMERGENCY LED CONVERSION KIT EMST Our LED emergency conversion kit has been designed to work with a wide range of products that require 3 hour emergency solutions. The unit has an intelligent automatic recharging function coupled with deep discharge protection. It has a wide voltage output range of 6V to 60V and the constant current mode is controlled automatically. It is a compact design that can be used internally or externally and is supplied with a charging LED and an option test switch. Gloss white pc Constructed from polycarbonate 3 Hours Emergency solution H: 30mm W: 43mm L: 180mm

The Timeguard SLFM360L is a flush mount ceiling PIR Presence detector. It will switch the lights on when a room is occupied and off when it is vacated, thus considerably saving energy. The 360 PIR presence detector has a detection range of 6m diameter (3m radius) if mounted at 2.5m height. This PIR sensor features an adjustable light ON time from 5 seconds to 18 minutes and a manual ON/OFF override. Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference.

FORCA MICROWAVE IP65 12W COOL WHITE The Forca is a functional bulkhead built to last, manufactured from polycarbonate, with a gloss white finish this fitting is suitable for both commercial and domestic applications. Featuring a screw lock design & IK08 rated, these fittings are sturdy and reliable. Complete with built in Microwave sensor 30 /150˚ detection angle, 0 to 50lux sensitivity, 10%(1 Meter) to 100% adjustable range with a 5 sec - 15 min timer function, Max. (diameter x height): 10m X 6m mounted on the ceiling, and Max. (Length x Height): 10m X 6m mounted on the wall Proj: 90mm Dia: 340mm Complete with LED driver

FORCA EMERGENCY IP65 12W COOL WHITE The Forca is a functional bulkhead built to last, manufactured from polycarbonate, with a gloss white finish this fitting is suitable for both commercial and domestic applications. Featuring a screw lock design & IK08 rated, these fittings are sturdy and reliable. Complete with LED driver K: 4200 Lm: 1140 Lm/W: 95 Proj: 90mm Dia: 340mm Emergency maintained & non-maintained fitting

FORCA MICROWAVE EMERGENCY IP65 12W COOL WHITE The Forca is a functional bulkhead built to last, manufactured from polycarbonate, with a gloss white finish this fitting is suitable for both commercial and domestic applications. Featuring a screw lock design & IK08 rated, these fittings are sturdy and reliable. Complete with built in Microwave sensor 30 /150˚ detection angle, 0 to 50lux sensitivity, 10%(1 Meter) to 100% adjustable range with a 5 sec - 15 min timer function, Max. (diameter x height): 10m X 6m mounted on the ceiling, and Max. (Length x Height): 10m X 6m mounted on the wall Complete with LED driver K: 4200 Lm: 1140 Lm/W: 95 Proj: 90mm Dia: 340mm Emergency maintained & non-maintained fitting

IMMERSION HEATER TIMER 2A 500W MAX LOAD Timer Switches

LED BULKHEAD 5W MAINTAINED AND NON MAINTAINED INTEGRAL

Slimline Ceiling and Wall Light 12W Non-Dimmable with Integrated 3hr Emergency and Microwave Sensor Function The Integral LED 12W low-energy ceiling and wall light delivers 1056 lumens, 4000K white colour temperature. Its back-lit LED design provides a 120 degree beam angle and an even light distribution. Integral IP54 Slimline ceiling and wall light is designed with only 48mm depth providing a low-profile style, suitable for all indoor areas such as hallways, stairways, walls and ceilings including bathrooms (Zone 2 and 3) and covered (sheltered) external areas, such as porches. Engineered from tough, high-grade polycarbonate material. Long life expectancy of 40,000 hours based on normal usage. Each unit is supplied with an easy installation bracket and an easy-to-follow installation guide. Its integrated emergency pack enhances the easy installation and maintenance. Once installed correctly in the event of mains power failure the ceiling/wall light will continue delivering light (300 lumen output) for a minimum of 3 hours. A constant green LED light is visible from the front to show the emergency mode is functional. Its integrated microwave sensor provides a 140 degree detection area within 5 to 7 meters.

Slimline Ceiling and Wall Light 12W Non-Dimmable with Integrated 3hr Emergency Function The Integral LED 12W low-energy ceiling and wall light delivers 1056 lumens, 4000K white colour temperature. Its back-lit LED design provides a 120 degree beam angle and an even light distribution. Integral IP54 Slimline ceiling and wall light has a low-profile depth of only 48mm and is suitable for all indoor areas such as hallways, stairways, walls and ceilings including bathrooms (Zone 2 and 3) and covered (sheltered) external areas, such as porches. Engineered from tough, high-grade polycarbonate material. Long life expectancy of 40,000 hours based on normal usage. Each unit is supplied with an easy installation bracket and an easy-to-follow installation guide. Its integrated emergency pack enhances the easy installation and maintenance. Once installed, in the event of a mains power failure the ceiling/wall light will continue delivering light (300 lumen output) for a minimum of 3 hours. A constant green LED light is visible from the front casing to show the emergency mode is functional.