SAFETY & SECURITY

The Ei407 Manual Call Point is an emergency device that when activated triggers all the alarms on the connected system.

The Ei3028 is a dual Heat and Carbon Monoxide (CO) Alarm. It contains a proven electrochemical CO sensor to detect the presence of toxic levels of Carbon Monoxide as well as an independent fast acting Class A1 Thermistor sensor to detect dangerous levels of heat, hence eliminating the need for installing 2 products in areas where both types of detection would be required.

The Ei3024 is a Multi-Sensor Alarm containing 2 separate sensing elements, intelligently monitored, in order to detect the presence of fire. Using its intelligent dual monitoring, it responds much faster to all fire types (TF1 to TF6 & TF8) than a traditional single sensor Alarm. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms.

The Ei3018 is a Carbon Monoxide Alarm which contains a proven 10 year electrochemical CO sensor to detect the presence of toxic levels of Carbon Monoxide (CO). In alarm, the flash rate of the red LED indicates the level of CO detected.

The Ei3016 Alarm features a high performance optical smoke sensor, ideal for detecting smoke from slow, smouldering fires. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms.

The Ei3014 is a Heat Alarm with a Class A1 heat detection. It is ideal for rooms where smoke Alarms cannot be installed without the risk of excessive nuisance alarms like the kitchen, garage, etc...

The Ei3000MRF is an optional add-on SmartLINK module for the Ei3000 series Alarms. It enables the Alarm to communicate wirelessly with other Ei Electronics RF devices. Up to 12 devices can be interconnected. It also facilitates a hybrid communication of hardwired and wireless connections.

The Ei208 Carbon Monoxide Alarm is a standalone battery powered unit, powered by a sealed in lithium cell with a 10-year lifespan. This means you won’t need to replace the battery at any point in the life of the alarm and that the battery cannot be removed ensuring continued protection.

The Ei168RC RadioLINK Base is an easi-fit mounting plate with built-in RadioLINK technology. It provides wireless interconnect between alarms, i.e. when one alarm is triggered, all alarms in the system sound.

The Ei1529RC is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From here you can identify which danger is present and the action you should take.

The Ei146RC is an Optical Smoke Alarm with 230V AC mains power supply and 9V alkaline battery back-up. It is ideal for location in the hallways and living rooms.

The Ei128R is a mains powered Relay Module that triggers external devices, such as a strobe light or telecare device, if the alarms in the property activate.

The Surface Mounting Kit allows additional space for wiring connections. It has a three-way, fitted connector block for ease of wiring, along with three trunking knock outs for surface wiring.

The Ei105C is an Optical Smoke Alarm, powered by a 9V Zinc battery. The alarm gives a fire warning when adequate smoke enters the alarm. Interconnectable with up to 12 battery powered alarms.

The Ei103C is a Heat Alarm, powered by a 9V Zinc battery.