SAFETY & SECURITY

DIGITAL CARBON DETECTOR 10YR ALKALINE BATTERY KIDDE

DIGITAL IMMERSION HEATER TIMER 2A 500W MAX LOAD 42 ON/OFF PROGRAMS Timer Switches

Accessible Disabled Persons Toilet Alarm Kit The UK's market-leading Disabled Persons Toilet Alarm kit. Includes everything required for a BS8300 clause compliant emergency assistance alarm. Attractively designed, easy to install and simple to use. Allows a distressed person to raise an alarm in the event of an emergency. To operate, the user pulls the cord of a ceiling pull to activate a light and sounder outside the WC and on the system's Call Controller. New ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal inside the WC to confirm help is on the way. Includes an NC943B 12V 140mA Call Controller c/w standby battery and relay, NC807C Ceiling Pull, NC806CS Overdoor Light c/w Sounder, NC809DBBT Accessible Toilet Reset Point c/w Sounder and NC949 Accessible WC Sticker. Can be wired in 4 core stranded security cable. Can also be used as a single zone emergency assistance alarm in changing rooms, solariums, interview rooms, reception areas and more.

The Ei103C is a Heat Alarm, powered by a 9V Zinc battery.

The Ei105C is an Optical Smoke Alarm, powered by a 9V Zinc battery. The alarm gives a fire warning when adequate smoke enters the alarm. Interconnectable with up to 12 battery powered alarms.

The Surface Mounting Kit allows additional space for wiring connections. It has a three-way, fitted connector block for ease of wiring, along with three trunking knock outs for surface wiring.

The Ei128R is a mains powered Relay Module that triggers external devices, such as a strobe light or telecare device, if the alarms in the property activate.

The Ei146RC is an Optical Smoke Alarm with 230V AC mains power supply and 9V alkaline battery back-up. It is ideal for location in the hallways and living rooms.

The Ei1529RC is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From here you can identify which danger is present and the action you should take.

The Ei168RC RadioLINK Base is an easi-fit mounting plate with built-in RadioLINK technology. It provides wireless interconnect between alarms, i.e. when one alarm is triggered, all alarms in the system sound.

The Ei208 Carbon Monoxide Alarm is a standalone battery powered unit, powered by a sealed in lithium cell with a 10-year lifespan. This means you won’t need to replace the battery at any point in the life of the alarm and that the battery cannot be removed ensuring continued protection.

The Ei3000MRF is an optional add-on SmartLINK module for the Ei3000 series Alarms. It enables the Alarm to communicate wirelessly with other Ei Electronics RF devices. Up to 12 devices can be interconnected. It also facilitates a hybrid communication of hardwired and wireless connections.

The Ei3014 is a Heat Alarm with a Class A1 heat detection. It is ideal for rooms where smoke Alarms cannot be installed without the risk of excessive nuisance alarms like the kitchen, garage, etc...

The Ei3016 Alarm features a high performance optical smoke sensor, ideal for detecting smoke from slow, smouldering fires. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms.

The Ei3018 is a Carbon Monoxide Alarm which contains a proven 10 year electrochemical CO sensor to detect the presence of toxic levels of Carbon Monoxide (CO). In alarm, the flash rate of the red LED indicates the level of CO detected.