SAFETY & SECURITY

Cooper FX002 Conventional Red Low Profile Surface Sounder This general purpose conventional surface sounder has been specifically designed to work with JSB conventional control panels. Volume is adjustable via the internal volume control and 32 different alarm tone selections are provided. Depending on the selected tone, sound levels of up to 105dB(A) can be achieved. Key Features: Low profile design Pre drilled cable entries Choice of colour, red or white 32 selectable tones Benefits: Low current, high sound output Suitable for a wide range of applications Automatic synchronisation

1800W/225WLED 200 DEGREE 12MTR RANGE SENSOR WHITE WITH MANUAL OVERRIDE

1800W/225WLED 200 DEGREE 12MTR RANGE SENSOR BLACK WITH MANUAL OVERRIDE

The Ei146RC is an Optical Smoke Alarm with 230V AC mains power supply and 9V alkaline battery back-up. It is ideal for location in the hallways and living rooms.

The Ei650i Optical Alarm is best for detecting slow, smouldering fires commonly produced by electrical fires or sofas and is less likely to react to cooking smells if fitted in the hallway next to the kitchen.

BOOSTMASTER ELECTRONIC TIMER 1/4 HOUR/1/2 HOUR/1 HOUR/2 HOUR TIMEGUARD

Sleek, lightweight CO alarm with a non-replaceable, sealed-in Lithium battery for ten years of continuous protection – meaning the user never needs to change the battery for the full duration of the alarm’s life. This slim, easy-to-use alarm is ideal for use in all living areas and can be installed on a wall or ceiling or used freestanding on a table or shelf. It is also easily portable so can be taken away on holidays.

The Timeguard SLFM360L is a flush mount ceiling PIR Presence detector. It will switch the lights on when a room is occupied and off when it is vacated, thus considerably saving energy. The 360 PIR presence detector has a detection range of 6m diameter (3m radius) if mounted at 2.5m height. This PIR sensor features an adjustable light ON time from 5 seconds to 18 minutes and a manual ON/OFF override. Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference.

HEAT DETECTOR battery Back Up KIDDE SUITABLE FOR KITCHENS

SWITCHED SPUR C/W BOOST TIMER

The Ei128R is a mains powered Relay Module that triggers external devices, such as a strobe light or telecare device, if the alarms in the property activate.

30W LED FLOOD C/W PIR 2400LM 6000K IP65 RED ARROW

FORCA MICROWAVE IP65 12W COOL WHITE The Forca is a functional bulkhead built to last, manufactured from polycarbonate, with a gloss white finish this fitting is suitable for both commercial and domestic applications. Featuring a screw lock design & IK08 rated, these fittings are sturdy and reliable. Complete with built in Microwave sensor 30 /150˚ detection angle, 0 to 50lux sensitivity, 10%(1 Meter) to 100% adjustable range with a 5 sec - 15 min timer function, Max. (diameter x height): 10m X 6m mounted on the ceiling, and Max. (Length x Height): 10m X 6m mounted on the wall Proj: 90mm Dia: 340mm Complete with LED driver

The Ei1529RC is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From here you can identify which danger is present and the action you should take.

EMERGENCY LED CONVERSION KIT EMST Our LED emergency conversion kit has been designed to work with a wide range of products that require 3 hour emergency solutions. The unit has an intelligent automatic recharging function coupled with deep discharge protection. It has a wide voltage output range of 6V to 60V and the constant current mode is controlled automatically. It is a compact design that can be used internally or externally and is supplied with a charging LED and an option test switch. Gloss white pc Constructed from polycarbonate 3 Hours Emergency solution H: 30mm W: 43mm L: 180mm

Slimline Ceiling and Wall Light 18W Non-Dimmable with Integrated Microwave Sensor Function The Integral LED 18W low-energy ceiling and wall light delivers 1584 lumens, 4000K white colour temperature. Its back-lit LED design provides a 120 degree beam angle and an even light distribution. Integral IP54 Slimline ceiling and wall light has a low-profile depth of only 48mm and is suitable for all indoor areas such as hallways, stairways, walls and ceilings including bathrooms (Zone 2 and 3) and covered (sheltered) external areas, such as porches. Engineered from tough, high-grade polycarbonate material. Long life expectancy of 40,000 hours based on normal usage. Each unit is supplied with an easy installation bracket and an easy-to-follow installation guide. Its integrated microwave sensor provides a 140 degree detection area within 5 to 7 meters.