Carriage Bolts & Hex Nuts - Zinc M10 x 130
Quantity: 2
A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber.
NOTE: Nuts included.
Metal Insulation Fixings - Zinc 8.0 x 140
Quantity: 100
Designed to anchor insulation material to concrete and masonry substrate materials.
NOTE: Once installed, the head of the fixing should be taped and sealed to avoid any contact with wet plaster. Failure to do so may result in surface damage.
• All metal through fixing
• Large diameter head
• Minimum embedment depth marker
Nylon Frame Fixings - PZ - Yellow 10.0 x 140
Quantity: 2
A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
• Anti-rotation lugs help prevent turning during installation
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.
Classic Multi-Purpose Screws - PZ - Double Countersunk - Stainless Steel 3.0 x 20
Quantity: 200
All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. NOTE: Sharp point only.
• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Fully threaded up to 75mm, thereafter partially threaded
• 40° deep single thread to provide a secure fixing with high pull-out resistance
Carriage Bolts & Hex Nuts - Zinc M10 x 150
Quantity: 14
A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber.
NOTE: Nuts included.
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.
Classic Multi-Purpose Screws - PZ - Double Countersunk - Stainless Steel 3.0 x 25
Quantity: 200
All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Fully threaded up to 75mm, thereafter partially threaded
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
Square Plate Washers - Zinc M12 x 50 x 50 x 3
Quantity: 2
Provides a large clamping surface and therefore spreading the load of a fastening.
• Plated in Trivalent Chromium (Cr3) Zinc
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.
Pack Quantity: 200 Pieces
C2 Multi-Purpose Advanced Screws - PZ - Double Countersunk - Yellow 6.0 x 60
Quantity: 200
Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Designed to give ultimate performance in a multitude of materials, the patented twin-cut point gives a consistent and rapid "pick-up" and reduces timber splitting. These unique features coupled with a synthetic lubrication and dual angle thread results in 52% less insertion torque and 43% quicker insertion time.
• Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw
• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage
• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating
• Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance
• Patented twin cut technology for rapid "pick-up" and reduces timber splitting
Hex Full Nuts - Zinc M16
Quantity: 4
A traditional nut used for all bolting and fastening applications. Zinc plated for internal use.
• Plated in Trivalent Chromium (Cr3) Zinc
Designed to anchor insulation material to concrete and masonry substrate materials. TO REDUCE RISK OF THERMAL TRANSMISSION USE TIMCO PLASTIC COVER CAPS
Pack Quantity: 100 Pieces