FIXINGS

3.5x45mm 00045COLDYS (1000) Collated Coarse Drywall Screws

Index Green 6.7x175 Box50 Wafer

3.5x75mm Self Drilling Drywall Screws (1000) 00075PSDD

3.5x50mm 00050COLDYS (1000) Collated Coarse Drywall Screws

Classic Multi-Purpose Screws - PZ - Double Countersunk - Stainless Steel 4.0 x 70 Quantity: 200 All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking • Fully threaded up to 75mm, thereafter partially threaded • 40° deep single thread to provide a secure fixing with high pull-out resistance • Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

Metal Insulation Fixings - Zinc 8.0 x 140 Quantity: 100 Designed to anchor insulation material to concrete and masonry substrate materials. NOTE: Once installed, the head of the fixing should be taped and sealed to avoid any contact with wet plaster. Failure to do so may result in surface damage. • All metal through fixing • Large diameter head • Minimum embedment depth marker

Wing-Tip Self-Drilling Screws - PH - Timber to Heavy Section Steel - Zinc 5.5 x 120 Quantity: 100 Specifically designed to attach wood to heavy section steel (Max. 12mm). Metric thread with wings designed to ream out the timber, so the screw can achieve Max. R.P.M. without burning out. When the wings hit the metal they will break off to permit the thread to self-tap into the metal. NOTE: Partially threaded.

3.5x55mm 00055COLDYS (1000) Collated Coarse Drywall Screws

C2 Multi-Purpose Advanced Screws - PZ - Double Countersunk - Yellow 6.0 x 180 Quantity: 100 Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Designed to give ultimate performance in a multitude of materials, the patented twin-cut point gives a consistent and rapid "pick-up" and reduces timber splitting. These unique features coupled with a synthetic lubrication and dual angle thread results in 52% less insertion torque and 43% quicker insertion time. NOTE: Partially threaded. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw • Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage • Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating • Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance • Patented twin cut technology for rapid "pick-up" and reduces timber splitting

Wing-Tip Self-Drilling Screws - PH - Timber to Heavy Section Steel - Zinc 5.5 x 65 Quantity: 200 Specifically designed to attach wood to heavy section steel (Max. 12mm). Metric thread with wings designed to ream out the timber, so the screw can achieve Max. R.P.M. without burning out. When the wings hit the metal they will break off to permit the thread to self-tap into the metal.

Classic Multi-Purpose Screws - PZ - Double Countersunk - Stainless Steel 5.0 x 100 Quantity: 100 All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. NOTE: Partially threaded. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking • Fully threaded up to 75mm, thereafter partially threaded • 40° deep single thread to provide a secure fixing with high pull-out resistance • Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

C2 Multi-Purpose Advanced Screws - PZ - Double Countersunk - Yellow 6.0 x 200 Quantity: 100 Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Designed to give ultimate performance in a multitude of materials, the patented twin-cut point gives a consistent and rapid "pick-up" and reduces timber splitting. These unique features coupled with a synthetic lubrication and dual angle thread results in 52% less insertion torque and 43% quicker insertion time. NOTE: Partially threaded. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw • Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage • Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating • Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance • Patented twin cut technology for rapid "pick-up" and reduces timber splitting

firma hold2.8x63mm RINGSHANK BRIGHT INCL FUEL CELLS (3300) CBRT63G

CBRT50G Fimahold Bright Ringed Nails 50mm x 2.8mm (3300) incl. 3 fuel cells

In-Dex Timber Screws - Hex - Exterior - Green 6.7 x 250 Quantity: 50 Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications. • 8mm hex head countersunk with a fixed washer • Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012 • Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion • Helix shank for removing debris and to improve clamping • 50° deep single thread to provide a secure fixing with high pull-out resistance • Single slash point to reduce torque and the risk of timber splitting at low edge distance

Classic Multi-Purpose Screws - PZ - Double Countersunk - Stainless Steel 6.0 x 40 Quantity: 200 All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking • Fully threaded up to 75mm, thereafter partially threaded • 40° deep single thread to provide a secure fixing with high pull-out resistance • Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge