Acrelane Timber. MANROSE

4" 100mm Standard Fan

Manrose 100mm (4") Standard Fan Designed for wall, ceiling or window mounting, this comprehensive range offers a wide selection of models for use in bathrooms and toilets. Quiet and efficient, the 100mm (4") series has an impressive extract rate of 85m3/hr, 23 liters per second. The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance- free life.

4" Pullcord Fan Wall / Ceiling

Manrose 100mm (4") Pull Cord Fan Designed for wall mounting only, for use in bathrooms and toilets. BVF100P has a built in pull cord to enable fan to be turned on/off by hand. Quiet and efficient, the 100mm (4") series has an impressive extract rate of 85m3/hr, 23 liters per second. The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance- free life.

4" 100mm Timer Fan

Manrose 100mm (4") Timer Fan Designed for wall, ceiling or window mounting, this comprehensive range offers a wide selection of models for use in bathrooms and toilets. BVF100T has an adjustable run on timer for use where there is a permanent and switched live available at the fan. Quiet and efficient, the 100mm (4") series has an impressive extract rate of 85m3/hr, 23 liters per second. The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance- free life.

4" SHOWER FAN KIT

VSF100T 4" TIMER SHOWER FAN KITC/W DUCT & GRILLES

Manrose Intervent 4inch. In-Line Shower Fan Timer Model Suitable for larger bathrooms, utility rooms, shops, offices, restaurants Pre oiled bearings for long and maintenance-free life Ceiling mounting version Complete with 3M ducting, inside circular white grill and extract grill 4" (100mm) in-line shower extractor fan with adjustable electronic overrun timer

6" 150mm Std Fan

Manrose Window/Wall Standard Extractor Fan - 6" / 150mm Manrose BVF150S for use in Kitchen, Toilet & Bathroom includes an extraction rate of 230m/hr and is mountable by wall/ceiling it features a slim body and can be used with up to 3m of ducting and gives low noise.

4" STANDARD WINDOW/WALL FAN

Manrose 4"/100mm Extractor Fan The Manrose 4" fan range is designed for wall, ceiling or window mounting for ideal use in bathrooms, toilets or kitchens, The XF100S model is a non-timer model is ideal for use in bathrooms and toilets and requires a switched live, and a neutral. The quiet and efficient 100mm (4") series has an impressive extract rate of 85m3/hr, 23 litres per second and the units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

4" 100mm Std Low Profile Fan CIRCULARLOW VOLTAGE

Manrose 100mm Circular Low Profile STD (Low Voltage) - WHITE Clear the air with the Manrose Lo Profile 100mm Extractor Fan (LP100CLVW). Whether it’s wall or ceiling mounted, this low voltage axial fan is ideal for removing steam and stale air from bathrooms and toilets. In addition to featuring an ultra-slim 10mm profile and circular white front cover, the LP100CLVW model also includes a long life motor for efficient performance that lasts.

4" In Line Fan with Bracket

Manrose ID100S 100mm (4") - Inline Fan Standard Model with Bracket Designed for the safe ventilation of bathrooms, toilets and shower rooms, the ID 100 (100mm 4") range of inline extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely. The extract rate of the ID100 is 85m3/hr 23 litres per second. The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.

4" 100mm Std Low Profile Fan

Manrose Lo Profile 4" Extractor Fan Slimline Range in White The Manrose LO PROFILE range is available in a WHITE finish, and provides an elegant alternative to a standard fan. It has a modern SLIM design and has a projection from the surface of only 10mm. Attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning designed for easy installation and can be wall, ceiling or window mounted.

4" 100mm Std Low Profile FanLOW VOLTAGE

Manrose 100mm Square Low Profile STD (Low Voltage) - WHITE Clear the air with the Manrose Lo Profile 100mm Extractor Fan (LP100SLVW). Whether it’s wall or ceiling mounted, this low voltage axial fan is ideal for removing steam and stale air from bathrooms and toilets. In addition to featuring an ultra-slim 10mm profile and square white front cover, the LP100SLVW model also includes a long life motor for efficient performance that lasts.

LOW VOLTAGE STANDARD CONTROLLER 25VA

Manrose T12S 12V Standard Remote Transformer Manrose T12S 12volt Transformer for Low Voltage Extractor Fans,Designed to power 12V low voltage fans installed in the splash area of the shower or bath, the T12 series of Safety Extra Low Voltage (SELV) transformers can be mounted in the loft area (not Pullcord, Humidistat or PIR models) or high-up on the ceiling next to the pullcord light switch.

4" 100mm Standard Fan

Manrose 4" 100mm Standard On/Off White Extractor Bathroom Shower Fan The RT Deco range is designed to compliment stylish bathrooms, with an unobtrusive, sleek design. Features: Unique square tile design Long life motor Easy to install and maintain Designed for Wall mounting. Design to comply with the Building regulations on ventilation (F1) Quiet and efficient, the Rtdeco fans have extraction rates of 75m3/hr 100mm (4”)

4" 100mm humidity Fan

Manrose 100mm (4") Humidity Timer Fan Designed for wall only, this comprehensive range offers a wide selection of models for use in bathrooms and toilets. The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

4" TIMER WINDOW/WALL FAN

Manrose 100mm Bathroom Extractor Fan with Timer The Manrose 4" fan range is designed for wall, ceiling or window mounting for ideal use in bathrooms, toilets or kitchens, The XF100T timer model is ideal for use in bathrooms and toilets and has an integral over-run timer adjustable from 1-20 minutes.. The quiet and efficient 100mm (4") series has an impressive extract rate of 85m3/hr, 23 litres per second and the units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning. It requires both a switched supply and a permanent live.

6" Timer fan

Manrose Extractor Fan with Timer - 6 inch/150 mm Manrose bathroom extractor fans are designed for wall, ceiling or window mounting, this comprehensive range offers a wide selection of models for use in bathrooms and toilets.

4" 100mm Std Quiet Fan

Manrose 4" Standard Quiet Extractor Fan Designed for wall and ceiling mounting, this comprehensive range is ideal for bathrooms and toilets. This Manrose QF100S non-timer model is for remote switching and requires a switched live and a neutral. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.

4" 100mm humidity & Pullcord

Manrose 100mm (4") Humidity Fan with pull cord Designed for wall, ceiling or window mounting, this comprehensive range offers a wide selection of models for use in bathrooms and toilets. The BVF100H has a built in adjustable (40% to 90%) Humidity sensor and also an adjustable over run timer from (1 to 45 minutes). Quiet and efficient, the 100mm (4") series has an impressive extract rate of 85m3/hr, 23 liters per second. The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance- free life.

4" 100mm Timer Quiet Fan

Manrose 4" Standard Quiet Extractor Fan with Integral Timer Designed for wall and ceiling mounting, this comprehensive range is ideal for bathrooms and toilets. This Manrose QF100T model has a built in overrun timer (adjustable from 1-20 mins) and requires both a switched supply and a permanent live. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.

4" 100mm Timer Fan Low Profile Chrome

Manrose Lo Profile 4" Extractor Fan Slimline Range with Timer in Chrome The Manrose LO PROFILE range is available in a CHROME finish, and provides an elegant alternative to a standard fan. It has a modern SLIM design and has a projection from the surface of only 10mm. Attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning designed for easy installation and can be wall, ceiling or window mounted.

4" In Line Fan c/w Timer & BracketID100T

Manrose ID100T 100mm Diameter In-Line Duct Fan with Adjustable Timer Designed for the safe ventilation of bathrooms, toilets and shower rooms, the ID100 (100mm 4") range of in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely. The ID100T adjustabe timer fan 1 - 20 minute fan is supplied for use with 100mm diameter ducting and due to its isolation being mounted above a ceiling and away from human touch. The unit is manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.

4" Window Fan Pull Cord

Manrose 4" Window Extractor Fan with Pull Cord Designed for window mounting, this non-timer model is ideal for use in bathrooms and toilets and is pull cord operated. This non-timer model is ideal for use in bathrooms and toilets and requires a permanent live and neutral. Quiet and efficient, the 100mm (4") series has an impressive extract rate of 85m3/hr, 23 litres per second. The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

4" 100mm Pullcord Quiet Fan

Manrose 4" Standard Quiet Extractor Fan with Pull Cord Designed for wall and ceiling mounting, this comprehensive range is ideal for bathrooms and toilets. This Manrose QF100P non-timer model has a pull cord override switch and requires a switched live and a neutral. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.

QUIET 4" Standard Fan27 dBA

Manrose 'Quiet Conceal' Extractor Fan 100mm / 4 inch (Standard Model) Designed for wall mounting the Conceal is sleak and stylish fan that will suit any interior. It is ideally suited for and toilets and bathrooms. It is one of the quietest extractor fans available which whispers away at 27dB(A).

6" Window / Wall Fan Standard

Manrose 6" Extractor Fan Standard The Manrose XF150S 6" Extractor Fan is designed for wall or ceiling mounting. These fans are suited to larger bathrooms, utility rooms, shops, offices and restaurants. It requires both a switched supply and a permanent live. Quiet and efficient, the 150mm (6") series has an extract rate of 230m/hr, 64 litres per second. The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

4" 100mm Std Low Profile Fan Chrome

Manrose Lo Profile 4" Extractor Fan Slimline Range in Chrome The Manrose LO PROFILE range is available in a CHROME finish, and provides an elegant alternative to a standard fan. It has a modern SLIM design and has a projection from the surface of only 10mm. Attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning designed for easy installation and can be wall, ceiling or window mounted.

4" Timer fan

Manrose Haylo Extractor Fan 4" (100mm ) Timer Model c/w Backdraft Shutter Supplied with both white & polished chrome bezel & grill Suitable for bathrooms & toilets Panel or wall mounting Integral backdraft shutter Air movement: 95m3/hr (26 litres per second)

4" Conceal Silent100mm Standard Fanc/w back draft shutter

Manrose Silent Conceal 100mm/4" Bathroom Fan -Standard Bathroom extractor fan with low noise level and flat-fronted design. Can be wall or panel-mounted. Comes with a performance-enhancing turning vane system located in the spigot to improve performance by maintaining high output. ABS plastic construction. Ideal for bathrooms and toilets..

4" 100mm humidity Fan wall

Manrose 100mm Axial Extractor Fan with Humidity Control & Pullcord This comprehensive range of 4" fans from Manrose have been designed for Wall, Ceiling or Window mounting for use in bathrooms, toilets or kitchens. Quiet and efficient the 100mm (4") series has an impressive extract rate of 85m³/hr, 23 litres per second. The units are are all manufactured using high ABS thermoplastics for strength, durability, aesthetics and easy cleaning. XF100 Series designed for wall mounting (pullcord version wall mounting only) through 100mm (4") diameter flexible or rigid pipes or Manrose low profile, flat channel ducting systems.

4" Standard Fan

Manrose Haylo Extractor Fan 4" (100mm ) Standard Model c/w Backdraft Shutter Supplied with both white & polished chrome bezel & grill Suitable for bathrooms & toilets Panel or wall mounting Integral backdraft shutter Air movement: 95m3/hr (26 litres per second)

4" 100mm Timer Low Profile Fan

Manrose Lo Profile 4" Extractor Fan Slimline Range with Timer in White The Manrose LO PROFILE range is available in a WHITE finish, and provides an elegant alternative to a standard fan. It has a modern SLIM design and has a projection from the surface of only 10mm. Attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning designed for easy installation and can be wall, ceiling or window mounted.

6" 150mm humidity Fan

Manrose Extractor Fan with Humidity and Timer - 6 inch/150 mm Extraction 230m³/hr Wall/ceiling mountable 1-20min over delay Automatic Humidity sensing Can be used with up to 3m of ducting