HEATING & VENTILATION

Manrose 4" Standard Quiet Extractor Fan with Integral Timer Designed for wall and ceiling mounting, this comprehensive range is ideal for bathrooms and toilets. This Manrose QF100T model has a built in overrun timer (adjustable from 1-20 mins) and requires both a switched supply and a permanent live. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.

4" aluminium flexible ducting SOLD IN 3MTR PACK

4" BROWN GRAVITY GRILLE 1162B

Manrose 100mm 4inch. Centrifugal Extractor Fan with Humidistat The CF200 range has been specifically designed to cope with long duct runs. All fans in the range are fitted with a backward curved centrifugal impeller to create a large airflow against the high pressures caused by longer lengths of ducting and resistance by grilles. Ideally suited for common or flat duct installations. The CF200H has a built in humidistat which operates the fan by detecting moisture content in the air. This ensures that the fan is in operation whenever it is most needed.

Manrose 100mm Centrifugal Adjustable Timer Fan CF200T Timer model incorporating integral adjustable electronic timer (1-20 mins) The CF200 centrifugal fans use the latest technology to provide extremely powerful, yet very quiet and vibration free ventilation. The CF100/200 ranges are designed for bathrooms, toilets, cloakrooms, Designed to move air over long distances, these units will give maximum performance even against pressures caused by long lengths of ducting and resistance by grilles. All models are fitted with a built-in spring operated non-return flap into the discharge spigot to stop backdraughts

Manrose Silent Conceal Fan White with timer 100mm / 4'' Bathroom extractor fan with low noise level and flat-fronted design. Can be wall or panel-mounted. Comes with a performance-enhancing turning vane system located in the spigot to improve performance by maintaining high output. ABS plastic construction. Ideal for bathrooms and toilets. Extraction Rate 75m³/hr Noise Level 16dBA at 3m

Manrose Silent Conceal 100mm/4" Bathroom Fan -Standard Bathroom extractor fan with low noise level and flat-fronted design. Can be wall or panel-mounted. Comes with a performance-enhancing turning vane system located in the spigot to improve performance by maintaining high output. ABS plastic construction. Ideal for bathrooms and toilets..

4" COTSWOLD STONE GRAVITY GRILLE

4" FIXED GRILLE BROWN 1152B

4" FIXED GRILLE COTSWOLD STONE

4" FIXED GRILLE TERRACOTTA 1152T

4" FIXED GRILLE WHITE 1152

4" GRAVITY GRILLE WHITE 1162W

Manrose 4" Quiet Extractor Fan with Integral Humidistat and Timer Designed for wall and ceiling mounting, this comprehensive range is ideal for bathrooms and toilets. This Manrose QF100H model has a built in Humidistat (adjustable from 40% RH to 95% RH), a built in overrun timer (adjustable from 1-20 mins), and requires both a switched supply and a permanent live. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.

Manrose ID100T 100mm Diameter In-Line Duct Fan with Adjustable Timer Designed for the safe ventilation of bathrooms, toilets and shower rooms, the ID100 (100mm 4") range of in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely. The ID100T adjustabe timer fan 1 - 20 minute fan is supplied for use with 100mm diameter ducting and due to its isolation being mounted above a ceiling and away from human touch. The unit is manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.

Manrose ID100S 100mm (4") - Inline Fan Standard Model with Bracket Designed for the safe ventilation of bathrooms, toilets and shower rooms, the ID 100 (100mm 4") range of inline extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely. The extract rate of the ID100 is 85m3/hr 23 litres per second. The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.