HAND TOOLS

Guided Trimmer 6.35mm Diameter x 25.4mm The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.

Ox trade Level 1800mm 3 Solid Acrylic Vials With Accuracy Of .5mm/M Or .0005in/In Uv Resistant Vials Milled Surface On Base Up To 1200mm Length Shock Absorbing Rubber End Caps Lifetime Vial Warranty Strong, Lightweight Aluminium Profile

Intumescent Cutter Set 15mm x 24mm Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work. Trend C220 x 1/4 TCT Intumescent Cutter to suit 4mm thick strip of 15mm width. Specification: Diameter: 24mm Cutting Depth: 15mm Bearing: 16mm Shank: 1/4in

Ox Pro Open Reel Tape Measure 50mtr 165ft Professional 3:1 Geared Open Reel Tape 50m Length Ergonomic Soft Grip Handle And Heavy Duty Casing Double Nylon Coated Fibreglass Blade

Stanley Fatmax XL Box Beam Level 47in 043648 The Stanley FatMax® Pro level has solid-block acrylic vials to provide an accuracy of 0.5mm/m in eight orientations. In addition, every FatMax Pro level comes with a lifetime accuracy warranty. The level is 5 times stronger than other Stanley levels, thanks to its unique reinforced box-beam construction. The lightweight aluminium body and sturdy bi-material handgrips make handling easy and the precision engineered, dual-machined levelling surfaces ensure maximum accuracy. The vials are magnified by 20% for improved all round visibility. Shock absorbing end caps protect the level even if it is dropped. Length: 1200mm (47in).

Intumescent Cutter Set 10mm x 24mm Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work. Trend C209 x 1/4 TCT Intumescent Recessor to suit 4mm thick strip of 10mm width. Specification: Diameter: 24mm Cutting Depth: 10mm Bearing: 16mm Shank: 1/4in

Ox Pro Screwdriver Set 7pc Pro Series 7pc Set Chrome Vanadium Steel Bar Soft Grip Handle Moulded Directly To Shaft For Ultimate Strength Colour Coded Handles Robust, Heavy Duty Case Set Includes: Flared 6.5 X 150mm, Parallel 3.5 X 75mm & 5.5 X 125mm, Phillips Ph1 X 100mm, Ph2 X 125mm, Pozi Pz1 X 100mm, Pz2 X 125mm

Rounding Over 6.3mm Radius x 12.7mm Cut Trend Rounding Over, self-guiding TCT cutter for rounding over edges. Does not require a side fence. Supplied with two bearings, use the larger bearing for a round over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Shank: 1/4in This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 6.3mm Cut Diameter: 25.4mm Depth: 12.7mm Shank: 1/4in

Ox Pro Heavy Duty Bar Clamp 18" 450mm Very Heavy Duty Construction For Durability High Clamping Force- 150kg Quick Change Conversion From Clamp To Spreader Tpr Jaw Pads Protect Surfaces From Damage

Ox Pro Framing Hammer 28oz Straight Claw Hammer Designed For Frame Work Long Handle For Greater Impact Non-Slip Grip Handle With Shock Reduction Forged, One Piece Steel Construction Precision Balanced

Template Profile 12.7mm Diameter Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work. This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm (C) Cutting Length: 25.4mm Shank: 1/4in

Ox trade Level 1200mm 3 Solid Acrylic Vials With Accuracy Of .5mm/M Or .0005in/In Uv Resistant Vials Milled Surface On Base Up To 1200mm Length Shock Absorbing Rubber End Caps Lifetime Vial Warranty Strong, Lightweight Aluminium Profile

Ox Pro High Tension Hacksaw 12" Quick Change Blade Design - 230kgf High Blade Tension Bi Grip Rubber Handle Blade In Either 45 degree /90 degree Cut Position No Tools Needed To Change Blade

Ox Pro Heavy Duty Bar Clamp 12" 300mm Very Heavy Duty Construction For Durability High Clamping Force- 150kg Quick Change Conversion From Clamp To Spreader Tpr Jaw Pads Protect Surfaces From Damage

Self Guided Chamfer Angle = 45 degrees 12.7mm Cut These types of cutter are used for edging and chamfer cutting, on man-made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V grooving. Ball bearing and pin guided cutters enable curved work to be undertaken, bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. A range of valuable self-guiding chamfer/bevel cutters. Bearing follows the board beneath. T.C.T. Shank. = 1/4in D = 32mm C = 12.7mm B = 9.5mm Angle = 45°

Self Guided Trimmer 12.7mm Diameter Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TCT. This Trend TCT 90° Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mm Cutting Depth: 25.4mm Shank: 1/4in