HAND TOOLS

Stanley Plug Cutter No.8 4722 Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand. Cuts Size 8 Plugs (8mm)

Stanley Sliding Pocket Utility Knife Quickslide 010810

Stanley Snap Off Blades (10) 9mm 011300

Template Profile 12.7mm Diameter Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work. This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm (C) Cutting Length: 9.5mm Shank: 1/4in

Template Profile 12.7mm Diameter Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work. This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm (C) Cutting Length: 25.4mm Shank: 1/4in

Trade Jab Saw 165mm 8TPI with Holster Supplied With Protective Holster For Safety When Not In Use Hardened & Tempered Steel Blade For Increased Life 8 Teeth Per Inch Non-Slip Ergonomic Handle Excellent For Wood, Plastic & Drywall

Two Flute Cutter 10mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in D - Diameter - 10mm C - Cutting Length - 19.1mm T.C.T.

Two Flute Cutter 12.7mm Diameter Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in D - Diameter - 1/2in 12.7mm C - Cutting Length - 1 1/4 31.8mm T.C.T. 2 Flutes.