3 SQ MTR HEAT MAT 400 WATT
SUNSTONE 10 YEAR WARRANTY
The cable in a SunStone Mat system is very similar to the cable found in a Loose Wire System. However, in this case, the cable is pre-fixed to a glass-fibre mesh providing the perfect spacing between each line of cable.
The fact that the cable is already perfectly spaced means that the SunStone Mat is extremely easy and quick to install, simply unroll the mat in a straight line until you reach the wall or unit on the other side of the room, cut the mat (not the cable), rotate the roll, and roll back up in the other direction. This process is to be repeated until the room is covered. This design reduces the time required to install the heater by 35%.
VIBRANT ANODISED ALUMINIUM, RED BELL PENDANT, BRAIDED CABLE, ADJUSTABLE HEIGHT
This Large Vibrant Red Bell Pendant Light has a sophisticated artisan look. The shapely red shade hangs elegantly from the ceiling, providing an attractive beam of light. And it makes any room look contemporary, vibrant and chic. The light fitting can easily be adjusted with the wire suspension for different ceiling heights.
Total Height (mm) 440
Total Height with Chain 1600
Width/Diameter (mm) 260
Lampholder E27
Wattage 1 X 60w
This Endon Paradox LED ceiling pendant is finished in matt and acrylic white and is suspended on clear cables. The looped design ensures the light is evenly spread around the room when illuminated as well as having a continous light source.
FEATURES:
Finished in white
LED
Continuous light source
Fully height adjustable at the point of installation
Matching floor and table lamps available (please see website)
Double insulated
SIZE:
Minimum height - 250mm
Maximum height - 1300mm
Width - 600mm
Depth - 250mm
BULBS:
Takes 31 watt Integral 2400 Lumen Warm White LEDs.
ARIES LED IP44 CHROME & SATIN SILVER 4 LIGHT ADJUSTABLE BAR SPOTLIGHT
This Aries chrome/satin silver 4 light spotlight is ideal for lighting your kitchen, bathroom or any other room in your home. The chrome and satin silver finish creates a clean, modern look for any ceiling, and the angle of the lights can be adjusted to create the perfect lighting effect. The ceiling spotlight is IP44 rated and fully splashproof. Complete with IP44 LED lamps.
Total Height (mm) 160
Width/Diameter (mm) 120
Length (mm) 900
Lampholder GU10
Wattage 4 X 5w
Accessible Disabled Persons Toilet Alarm Kit
The UK's market-leading Disabled Persons Toilet Alarm kit.
Includes everything required for a BS8300 clause compliant emergency assistance alarm.
Attractively designed, easy to install and simple to use.
Allows a distressed person to raise an alarm in the event of an emergency. To operate, the user pulls the cord of a ceiling pull to activate a light and sounder outside the WC and on the system's Call Controller.
New ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal inside the WC to confirm help is on the way.
Includes an NC943B 12V 140mA Call Controller c/w standby battery and relay, NC807C Ceiling Pull, NC806CS Overdoor Light c/w Sounder, NC809DBBT Accessible Toilet Reset Point c/w Sounder and NC949 Accessible WC Sticker.
Can be wired in 4 core stranded security cable.
Can also be used as a single zone emergency assistance alarm in changing rooms, solariums, interview rooms, reception areas and more.
Firstlight 4854BL Curtis One Light Ceiling Pendant Light In Matt Black With Copper Inside
This Firstlight Curtis one light ceiling pendant light is finished in brushed steel and has sleek curved lines and a white inside. Suspended from the ceiling plate on a black wire, this stunning light would make a wonderful addition to any room, in particular in a kitchen or dining room.
Height - 195mm
Maximum drop - 1200mm
Diameter - 400mm
Takes 1x 60 watt E27 Edison Screw Bulb - Not included
Also suitable for use with LED bulbs.
Firstlight 4854CP Curtis One Light Ceiling Pendant Light In Brushed Copper
This Firstlight Curtis one light ceiling pendant light is finished in brushed copper and has sleek curved lines and a white inside. Suspended from the ceiling plate on a black wire, this stunning light would make a wonderful addition to any room, in particular in a kitchen or dining room.
Height - 195mm
Maximum drop - 1200mm
Diameter - 400mm
Takes 1x 60 watt E27 Edison Screw Bulb - Not included
Also suitable for use with LED bulbs.
Firstlight 4870 Pascal One Light Round Ceiling Pendant Light In Black With Clear Glass
This Firstlight Pascal one light round ceiling pendant light is finished in black with clear glass. This stunning light is suspended on a black chain and the black diamond edging and detail between the glass panes, creates a beautiful light. It would make an incredible addition to any room.
Diameter - 240mm
Height - 220mm
Maximum drop - 1200mm
Takes 1x 60 watt E27 Edison Screw Bulb - Not included
Also suitable for use with LED bulbs.
Dimmable
CONE WHITE METAL PENDANT LIGHT WITH GOLD INNER, WOOD D'COR, ADJUSTABLE
This White Cone Pendant Light with Gold Inner looks modern and classic. The stylish cone shade has a textured white finish and a gold coloured, burnish inner that reflects the light beautifully. The shapely wooden ceiling fixture completes the look of this contemporary fitting and it is attached to a wire suspension that can be adjusted to the perfect ceiling height.
Total Height (mm) 330
Total Height with Chain 1280
Width/Diameter (mm) 350
Lampholder E27
Wattage 1 X 60w
BG CFUDP16606 Amendment 3 6 Way Dual RCD Consumer Unit and 6 x MCB Devices included.
Features:
Modern and Stylish Design fully loaded with MCB Devices
High Integrity up to 4 Circuits
Accepts up to 6 Ways protected by RCD 1 and 5 ways protected by RCD 2 and 4 Ways Switched
Fast and Simple Installation
Various cable knockouts 20 mm, 25 mm and 32 mm
MCB Devices: 2 x 6A, 2x 32A, 1 x 16A & 1x 40A Included
2 x Cover Blanks Included
Main Isolator Switch: 100A DP Main Switch Included
RCD Unit: 2 x 63A DP 30mA RCD Included
Amendment 3 Approved Consumer Unit
The Ei3028 is a dual Heat and Carbon Monoxide (CO) Alarm. It contains a proven electrochemical CO sensor to detect the presence of toxic levels of Carbon Monoxide as well as an independent fast acting Class A1 Thermistor sensor to detect dangerous levels of heat, hence eliminating the need for installing 2 products in areas where both types of detection would be required.